Software Products

1. It is suitable for 4G/5G network that simulates 5G NSA non-standalone networking mode.

2. The simulation network can be used for R&D testing and post-production testing.

1. This test software is suitable for simulating 5G SA independent networking network. The simulation software supports the simultaneous simulation of multiple 5G cells, supports simultaneous access of multiple terminal devices, supports VoNR, and supports EPS fallback, handover, redirection and other features.

2. It is used for self-testing in the research and development stage, and can also be used for comprehensive product testing in the later stage.

1. The test software supports the configuration of the data transmission channel under ENDC Split, that is, only LTE MCG bearer, only NR SCG bearer, or both LTE MCG and NR SCG bearer.

2. When configuring to carry MCG and SCG at the same time, the test software supports configuring or canceling the data bearing ratio of MCG and SCG.

3. Applicable 5G equipment can be mobile terminal type or CPE type.

1. Data performance evaluation test of single-card terminal equipment supporting 5G SA.

2. Support SA independent networking mode, users can use it for peak rate verification, or rate test in user-defined scenarios.

3. The connection between the device under test and the test instrument can be conducted by conduction or by wireless transmission over the air interface.

1. The test software supports NSA non-independent networking mode.

2. Data performance evaluation test of single-card terminal equipment supporting 5G NSA, such as single-card mobile phone, CPE, etc.

1. It is used to evaluate the compatibility of 5G terminal equipment in the existing telecom 5G network, and to evaluate whether the 5G equipment meets the network access requirements of operators.

2. It includes some application scenarios that are often encountered in the existing network, such as mutual reselection, handover and redirection between 5G and 4G networks, EPS fallback calls, and some application scenarios specific to operators, such as timer T3502 , the display of 5G signal bar icons, etc.

1. This test software supports the simultaneous simulation of 5G networks of multiple operators, such as the simultaneous simulation of China Telecom and China Mobile networks.

2. The maximum number of network emulations is unlimited in software, but in practice it depends on the capabilities of the configured 5G emulator, such as radio frequency channel capabilities.

3. The simulated 5G network supports SA and NSA network modes.

4. The simulation software supports independent processing of each PLMN network. For example, when simulating a telecom and mobile hybrid dual PLMN network, the software supports the primary and secondary cards of a dual-card mobile phone to access the telecom and mobile networks respectively, and processes related processes.

5. This test software can be used for research and development testing, and can also be used for comprehensive testing of later products.

1. Data performance evaluation test of terminal equipment supporting 5G access technology and 256QAM.

2. The test software supports 5G SA and NSA network modes, and supports uplink 256QAM and downlink 256QAM. device under test

1. Support NSA and SA network modes, which can be used for conduction test and OTA test mode.

2. The applicable 5G device can be either a mobile phone terminal type or a CPE type, but both require the device under test to support 4-antenna reception.

3. The device under test needs to be able to log in remotely, and can upload and download files, so as to install the iperf streaming software into the test device.

1. Dynamic performance evaluation test software for testing 5G terminal equipment supporting NSA topology.

2. The dynamic scenario test is actually in the laboratory, using a network emulator to simulate the real network, using a channel simulator to simulate the propagation path of the live network signal, and then testing the behavior and performance of the terminal in this environment.

1. It is used to evaluate the performance of 5G SA terminal equipment in a dynamic SA simulation environment, including data transmission throughput and ping delay.

2. The test software integrates fading channel emulation, so it can be run without an external channel emulator.

3. During the test, the signal connection between the terminal under test and the instrument adopts the OTA method.

1. By testing routers, you can learn which routers provide the best performance. Behavior of routers under different loads, modeling network using router design parameters, whether routers can handle burst traffic, performance limitations of routers, whether routers can provide different quality of service, the impact of different architectures of routers on function and performance, routers Features and performance indicators, whether the use of routers affects network security, the consistency of router protocol implementations, router reliability, and the advantages and disadvantages of router products.

2. Support functional testing, stability and reliability testing, and interoperability testing.

3. Execute some specified test cases such as throughput, multi-user, etc. through the test software.

1. The WIFI terminal test system is a test platform combining software and hardware.

2. You can perform some specified test cases through the test software, such as throughput, multi-user, access time, connection time, roaming test, web page delay, etc.